So I took my little block print from yesterday and printed it several times in black ink on paper. I played with the layout and possible designs.
I kept the designs small, because thermofax screens are easier for me to print if the are small. I can hold and move all the tools to make an overall print.
I made about 4 different screens and just had to test them all, the whole orange, 1/2 slice and some tumbling 1/2 slices. Some of the screens burned more successfully than the others. I am never quite sure why.
I warmed up the machine and ran the photocopy through with the emulsion coated mesh screen. Usually is comes out ever so slightly stuck to the screen. This time they were not so stuck. The 1/2 slice looked okay, but when I got to printing it, the impression was somewhat spotty.
I don’t use the machine enough to be able to really read the the screen. It is hard for me to tell if the emulsion has been “burned” enough. Of course there are other factors, ink, paper, fabric and type of squeegee that all affect the quality of the impression.
So I played with printing on several different types of fabric and paper to see if that was affecting my impression. It printed beautifully on this scrap piece of linen. Notice the blue block printed mark. I think this is a great example of the difference between the type of mark that is possible with soft carved block prints and thermofax screen prints.
The more I print, the more I learn. I like it that way. Have you tried screen printing with simple paper stencils? Check out the free tutorial.
Join today and get notice of future classes.
You will also get weekly emails about printmaking, tips, tools and classes.
The post Screen print from a block printed impression appeared first on Linda Germain.
from Linda Germain http://www.lindagermain.com/2016/11/screen-print-block-printed-impression/
All about prints
No comments:
Post a Comment